System

Fire Alarm Inspection & Testing

Your fire alarm is the first system a fire inspector asks about and the one with the most that can go quietly wrong. A panel, hundreds of devices, batteries, annunciators, and interfaces to elevators, dampers, door hardware and monitoring — any one of which can drift out of service without anyone noticing until the annual test.

Sigma tests the whole system to CAN/ULC-S536, verifies it to CAN/ULC-S537 whenever it is installed or modified, corrects what we find, and gives you a report your fire department and your insurer will accept without a follow-up question.

What we actually do

Test the control panel, power supplies, batteries and standby power, and every initiating and notification device on the building list — smoke and heat detectors, pull stations, waterflow and supervisory switches, bells, horns, strobes and speakers.

We also test the parts most vendors skip: annunciator function, audibility, and the ancillary devices your alarm is supposed to operate — elevator recall, magnetic door hold-opens, damper closure, HVAC shutdown and door release.

How often it is due

Full annual inspection as well as recommended daily and monthly checks.

Why teams call us

The technician who finds the fault is qualified to fix it. Devices get replaced, faults get cleared and the deficiency list gets closed out on the same visit wherever parts allow — instead of sitting in a report waiting on a second contractor’s schedule.

And because we design and install fire alarm systems too, we can tell you honestly when a panel is worth servicing and when it has reached the end of its life.

Services we perform on this system

FAQ

Frequently asked questions

How often does a fire alarm system need to be inspected in Ontario?

Once a year, by a qualified technician, to CAN/ULC-S536 — that’s the requirement under the Ontario Fire Code. On top of that, building staff are responsible for daily and monthly checks of the panel. We handle the annual test and set your team up to do the routine checks properly.

What’s the difference between annual testing and verification?

The annual test confirms an existing system still works. Verification, to CAN/ULC-S537, confirms a new or modified system was installed correctly in the first place — so it’s required after installation and any time devices are added, moved or replaced. They’re different documents and your fire department may ask for either.

Our panel is showing a trouble signal. Is that an emergency?

Treat it as urgent. A trouble signal means part of the system isn’t supervised or isn’t working, and in some cases it means you’re required to put a fire watch in place. Call our 24/7 line and we’ll tell you what you’re looking at.

Do you do integrated systems testing?

Yes. Where your fire alarm interconnects with elevators, HVAC, dampers, door hardware or suppression systems, CAN/ULC-S1001 integrated testing confirms those systems work together, not just individually. Newer buildings in particular are often unaware this applies to them.

Is your building in full compliance?

Get in touch and learn how we can bring your building to full fire & life-safety compliance.